SMA inverter operating manual 15000TL / 20000TL / 25000TL part 1
The Sunny Tripower is a transformerless PV inverter with two MPP trackers which converts the direct current of the PV array to grid-compliant three-phase current and feeds it into the utility grid.
Design of the Sunny Tripower
|A||Thread for screwing in two eye bolts for transport|
The type label uniquely identifies the inverter. You will require the information on the type label to use the product safely and when seeking customer support from the SMA Service Line. You will find the following information on the type label:
• Device type (Model)
• Serial number (Serial No.)
• Date of manufacture
• Device-specific characteristics
The LEDs indicate the operating state of the inverter
The display shows the current operating data and events or errors (see service manual at www.SMA-Solar.com).
|G||Lower enclosure lid|
|H||Upper enclosure lid|
|I||DC load-break switch
The inverter is equipped with a DC load-break switch. If the DC loadbreak switch is set to the position I, it establishes a conductive connection between the PV array and the inverter. Setting the DC load-break switch to the O position interrupts the DC electric circuit and completely disconnects the PV array from the inverter. Disconnection takes place at all poles.