SMA inverter operating manual part 2
Symbols on the Inverter and on the Type Label
Together with the green LED, this symbol indicates the operating state of the inverter.
|2||Observe the documentation
Together with the red LED, this symbol indicates an error (for troubleshooting, see the service manual at www.SMA-Solar.com).
No function. The inverter is equipped with Speedwire/Webconnect.
This symbol indicates that the inverter must be additionally grounded if a second grounding conductor or equipotential bonding is required locally (see Section 6.3.3 “Connecting Additional Grounding”, page 27).
|5||Danger to life due to electric shock
The product operates at high voltages. All work on the product must be carried out by qualified persons only.
|6||Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during operation. Allow the product to cool down sufficiently before carrying out any work.
|7||Observe the documentation
Observe all documentation supplied with the product.
|9||The product does not have a transformer.|
|10||Three-phase alternating current with neutral conductor|
Do not dispose of the product together with the household waste but in accordance with the locally applicable disposal regulations for electronic waste.
The product complies with the requirements of the applicable EU directives.
|13||Degree of protection IP65
The product is protected against dust intrusion and water jets from any angle.
|14||The product is suitable for outdoor installation|
|15||RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable Australian standards.